B-1.1, r. 2 - Construction Code

Section 8.144 Disposition versions

2012-09-01

8.144. The fuelling area in a motor fuel dispensing outlet must be impermeable to petroleum products over a surface extending at least 3 m in front and 1.5 m to the sides of each motor fuel dispenser measured from the centre of the dispenser. Despite the foregoing, that requirement does not apply to a fuelling area

(1)  for off-highway vehicles or farm equipment;

(2)  to be used for a single period of less than one year;

(3)  situated in a designated location; or

(4)  the tanks of which have a capacity lower than 2,500 litres.

The impermeability referred to in the first paragraph may be obtained using a reinforced concrete apron or an asphalt layer treated to make it resistant and impermeable to petroleum products.

O.C. 220-2007, s. 1.